7.
Install the foreign device interface PWB. Secure using the 2 cross head screws supplied
in the kit,
Figure
2.
Figure 2 Installation
Accessories
ACC 2
8.
1
Install the PBA foreign
device interface.
9.
10. Reinstall the rear cover.
11. If necessary, reinstall the fax module.
12. If necessary, reinstall the network cable and the finisher harness.
13. Go to
Enabling the Foreign Device Interface
1.
2.
3.
4.
5.
6.
7.
8.
9.
January 2016
8-4
Connect the foreign device interface harness. Connect the harness to CN28 on the main
PWB,
Figure
3.
CN28
Figure 3 Harness install
Reinstall the infill cover.
Enabling the Foreign Device
Interface.
Switch on the machine.
Enter System Admin Tools,
GP
4.
Select 'Access and Accounting'.
Select 'Authentication Mode'.
Under Foreign Device Interface, select 'On'.
Select 'Save'.
In the Access and Accounting' window, select 'Foreign Device Interface Setup'.
Correctly setup the foreign device interface.
Exit System Admin Tools.
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/