Xerox WorkCentre 4150 Service Manual page 140

09-290 Print Quality Information RAP
09-290 The machine has detected a toner supply error, toner sensor error or drum lock error.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. This RAP is for information only. If the machine can not resolve the fault, a relevant fault
code will be displayed.
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
WARNING
09-300 Drum Warning RAP
09-300 The xerographic module is near the end of the design life. The design life is 55,000
(4150) or 80,000 (4250/4260) print pages.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. No immediate action is necessary. Ensure that a replacement xerographic module,
9.10 Item 1 is in stock.
January 2016
2-67
WARNING
Status Indicator RAPs
09-290, 09-300
PL