Xerox WorkCentre 4150 Service Manual page 325

13. As necessary, remove the stack height sensor or paper empty sensor,
Figure 4 Sensors
Repairs and Adjustments
REP 7.7
Figure 4. Replacement
1. Replacement is the reverse of the removal procedure. To reinstall the tray feed assembly,
refer to
Stack height sensor.
Paper empty sensor.
January 2016
4-124
Figure 5.
1
Put the harness through
the paper transport
assembly.
Figure 5 Reinstalling the feed assembly
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
3
Hold the feed head.
2
Reinstall the feed
head support spring.
5
Reinstall the tray feed
assembly.
4
Locate the drive shaft
through the hole in the
machine frame.