Dc132 Nvm Initialization - Xerox WorkCentre 4150 Service Manual

dC132 NVM Initialization

NOTE: The NVM Initialization procedures for the 4265 are indicated where applicable.
Refer to the relevant section:
• NVM Initialization - Copier
• NVM Initialization - Network
• NVM Initialization - Fax Card
NVM Initialization - Copier
Purpose
To return the copier NVM settings to default. Refer to dC131.
Procedure (4150, 4250, 4260)
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Copier Routines, then 132 NVM Initialization - Copier.
4. Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table 1, for the functions that are reset to default:
• All Copier NVM
• Machine Variable NVM
• SA/KO Dust Off
• System Counters Dust Off
5. Switch off the machine, then switch on the machine.
Procedure (4265)
1. Enter Diagnostics, GP 1.
2. Select Copier Diagnostics.
3. Select dC 132 NVM Initialization.
4. Select Initialize All NVM.
5. Switch off the machine, then switch on the machine.
Table 1 Copier NVM
All Copier
Copier file type Category NVM
NVM System Usage Counter Y
NVM Fault Counter Y
NVM Diag Counter Y
NVM SAKO Setting Y
NVM Fault Log Y
NVM Configuration Y
NVM Diagnostics Y
NVM Debug Y
NVM Mach Var Y
General Procedures and Information
dC132
System
Machine SA/KO Dust Counters
Variable NVM Off Dust Off
Y
Y
Y
Y
Y
Copier file type Category
NVM Mach Var Zero
NVM Mach Var Registration
NVM Mach Var Paper Path
NVM Mach Var DADF
NVM Mach Var Platen
NVM Auditron
NVM Crash Recovery
NVM Completed Job Log
NVM JBA Database
NVM JBA Config
NVM Auditron Config
NVM HFSI Counter
NVM Initialization - Network
Purpose
To reset the NIC PWB to default.
Procedure (4150, 4250, 4260)
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Network Routines, then 132 NVM Initialization - Network.
4. Follow the screen instructions to reset the NIC PWB.
5. Switch off the machine, then switch on the machine.
Procedure (4265)
1. Enter diagnostics, GP 1.
2. Select Fax and NW Diagnostics.
3. Select dC 132 NVM Initialization - NW.
4. Follow the screen instructions to reset the NIC PWB.
5. Switch off the machine, then switch on the machine.
NVM Initialization - Fax Card
Purpose
To return the fax card NVM settings to default. Refer to dC131.
Procedure
1. Enter diagnostics, GP 1.
2. Select Diagnostic Routines.
3. Select Fax dC Routines, then 132 NVM initialization.
4. Touch the appropriate button to select the NVM to be initialized and follow the screen
instructions. Refer to Table
• Reformat
January 2016
6-62 WorkCentre 4150/4250/4260WorkCentre 4150/4250/4260WorkCentre Work-
Table 1 Copier NVM
All Copier Machine SA/KO Dust
NVM Variable NVM Off
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y
Y
Y Y
Y Y
Y Y
N N N
2, for the functions that are reset to default.
System
Counters
Dust Off
N