Xerox WorkCentre 4150 Service Manual page 332

15. Remove the registration guide, Figure
NOTE: The connectors in the registration guide can remain connected.
Figure 6 Registration Guide Removal
16. Remove the registration roll, Figure
Figure 7 Registration Roll Removal
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
6.
1
Remove 2 screws.
2
Remove the registration guide.
7.
1
Remove the registration
roll.
17. Remove the front registration idler roll bearing,
1
Remove the E-clip,
then the bearing.
Figure 8 Front Bearing Removal
January 2016
4-131
Figure 8.
Repairs and Adjustments
REP 8.2