4.
Dislocate the Input Tray from the DADF
1
Dislocate the Input Tray from the pivot bearings by
pressing inwards on each side of the tray
2
Leave the Input Tray on top of the DADF.
Figure 2 Dislocating the Input Tray from the DADF
Repairs and Adjustments
REP 5.19
(Figure
2).
5.
Remove the Rear Cover from the DADF
Figure 3 Removing the Rear Cover
6.
Remove the DADF Pickup Assembly
January 2016
4-72
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure
3).
1
Detach the Rear
Cover from the DADF
(REP
5.15).