REP 7.4 Tray 2 to 4 Paper Size Detect PWB
Parts List on
PL 7.20
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions,
1.
Remove the relevant paper tray.
2.
Remove the tray rear cover,
PL 7.20 Item
3.
Disconnect CN16 on the tray PWB.
Repairs and Adjustments
REP 7.4
WARNING
WARNING
CAUTION
GP
10.
4.
Remove the tray paper size detect assembly,
NOTE: The tray 2 paper size detect PWB is shown in
and tray 4 paper size detect PWBs is identical.
10.
January 2016
4-114
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
Figure
1.
Figure
1. The removal of the tray 3
1
2
Remove the tray
Remove 3 screws.
paper size detect
assembly.
Figure 1 Removal