Xerox WorkCentre 4150 Service Manual page 275

9. Remove the DADF Drive Roll Motor Assembly
1
Remove the
idler spring.
4
Remove the DADF Drive Roll Motor Assembly.
Figure 6 Removing the DADF Drive Roll Motor Assembly
Replacement
1. Reinstall the DADF Drive Roll Motor Assembly:
a. Install the drive belt onto the Drive Roll Motor drive gear.
b. Loosely install the Drive Roll Motor using the three mounting screws.
c. Reinstall the idler spring.
d. Tighten down the three motor mounting screws.
2. Reinstallation is the reverse of the Removal procedure.
Repairs and Adjustments
REP 5.19
(Figure 6).
2
Remove the three motor
mount screws.
3
Detach the motor drive belt.
January 2016
4-74 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/