Pl 8.20 Paper Transport Assembly - Xerox WorkCentre 4150 Service Manual

PL 8.20 Paper Transport Assembly

Item Part Description
1 002N02859 Paper transport assembly
(4250/4260/4265)
– 002N02563 Paper transport assembly (4150)
(REP 8.3)
2 019N00911 Bypass tray retard assembly
8.5)
3 – Retard pad holder (P/O
Item 2)
4 019N00566 Retard pad (See Note)
5 – E-Clip (Not Spared)
6 – Bearing (P/O
7 – Lower guide (P/O
8 007N01535 Gear
9 – E-Clip (Not Spared)
10 002N02577 Bypass tray feed roll assembly
(REP 8.6)
11 – Shaft (P/O PL 8.20 Item
12 029N00374 Pin
13 016N00290 Clutch bush
14 009N01602 Clutch spring
15 005N01090 Collar
16 – Roller frame (P/O
17 022N02373 Feed roll (4150/4250/4260/4265)
18 005N01089 Clutch
19 007N01533 Gear 26T
20 – Shaft (P/O PL 8.20 Item
21 – Washer (P/O
22 007N01179 Idler gear 38T
23 022N02190 Roll assembly
24 007N01534 Idler gear 34T
25 009N01604 Spring
26 130N01274 Bypass paper empty sensor
(Q07-510)
27 – Upper guide (P/O
28 005N01085 Bypass feed clutch (CL08-800)
29 – KL-Clip (P/O
30 009N01603 Spring clutch
31 – Bush (P/O PL 8.20 Item
32 – Front link arm (P/O
33 – Rear link arm (P/O
34 – Front feed gate (P/O
1)
35 – Rear feed gate (P/O
1)
36 032N00494 Grounding pad (4250/4260)
NOTE: HFSI. To reset the HFSI count, go to GP 16.
The Paper Transport Assembly does not include the Bypass
Feed Clutch and KL-Clip.This applies to 4150/4250/4260
Parts List
PL 8.20
(REP 8.3)
(REP
PL 8.20
(REP 8.5)
PL 8.20 Item 1)
PL 8.20 Item 1)
10)
PL 8.20 Item 10)
10)
PL 8.20 Item 10)
PL 8.20 Item 1)
PL 8.20 Item 1)
1)
PL 8.20 Item 1)
PL 8.20 Item 1)
PL 8.20 Item
PL 8.20 Item
January 2016
WorkCentre 4150/4250/4260/4265WorkCentre 4150/4250/4260WorkCentre