Xerox WorkCentre 4150 Service Manual page 112

• DADF PWB, PL 5.60.
• Document transport assembly,
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
PL 5.60.
05-930 DADF Exit Door Open RAP
05-930 The machine has detected that the DADF exit door is open.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
(4150/4260) Refer to Wiring Diagram
1. Raise the DADF input tray,
26. Check that the DADF exit sensor actuator is not missing or damaged. Install new
components as necessary,
2. Enter dC330 code 05-180. Check the DADF exit open sensor (Q05-180),
16.
3. Check the wiring between the DADF exit open sensor and CN6 on the
PWB. If necessary, install a new DADF exit open sensor,
4. Check the wiring between CN1 on the
5. If necessary, install new components:
• DADF PWB, PL 5.20 Item
• DADF sensor PWB,
• Document transport assembly,
(4265) Refer to Wiring Diagram
1. Raise the DADF input tray,
the DADF exit sensor actuator is not missing or damaged. Install new components as
necessary, PL TBD..
2. Enter dC330 code 05-180. Check the DADF exit open sensor (Q05-180), PL TBD..
3. Check the wiring between the DADF exit open sensor and CN7 on the
necessary, install a new DADF exit open sensor, PL TBD.
4. If necessary, install new components:
• DADF PWB, PL 5.60.
• Document transport assembly,
January 2016
2-39
WARNING
11. Perform the following:
PL 5.10 Item 5. Open the DADF exit assembly,
PL 5.20.
PL 5.20 Item
DADF Sensor PWB and CN3 on the
6.
PL 5.20 Item 4.
PL 5.10 Item 2.
45. Perform the following:
PL 5.60 . Open the DADF exit assembly, PL TBD. Check that
PL 5.60.
PL 5.20 Item
PL 5.20 Item
DADF Sensor
16.
DADF PWB.
DADF PWB. If
Status Indicator RAPs
05-920, 05-930