Xerox WorkCentre 4150 Service Manual page 246

2
Remove 4 screws
marked A.
Figure 3 Separate the Top Cover Assembly
6. Remove the registration sensor, PL 5.40 Item
Replacement
Replacement is the reverse of the removal procedure. Ensure that the DADF feed gate and
link arm are correctly positioned when the top cover assembly is reassembled,
WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
1
Remove the feed roll
assembly spring.
3
Separate the top cover
assembly.
17.
Figure 4.
January 2016
4-45
Feed gate
Link arm
Figure 4 Replacement
Repairs and Adjustments
REP 5.4