WAGO I/O System 750 XTR
750-xxxx/040-xxx System Manual XTR
6.7.3
Shielded Signal Lines
Use shielded signal lines!
Always use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then you can ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
6.7.4
WAGO Shield Connecting System
The series 790 WAGO shield connecting system consists of shield clamping
saddles, busbars and various mounting carriers. These components can be used
to achieve many different configurations.
Figure 34: Examples of the WAGO Shield Connecting System
Figure 35: Application of the WAGO Shield Connecting System
Connect Devices
69
Manual
Version 1.3.0