MacDon D65 Operator's Manual page 115

9. Lift the outer half (B) and insert it into the inner half (A)
10. Secure the two halves together with L-pin (A), then turn
to lock. Secure pin with ring (B).
11. Connect electrical harness to connector (C).
12. Position tow-bar (A) onto axle, and push against latch
(B) until tow-bar pins drop into hooks (C).
13. Check that latch (B) has engaged tow-bar.
14. Install clevis pin (D), and secure with hairpin.
169899
OPERATION
Figure 4.98: Assembling Tow-Bar
Figure 4.99: Assembling Tow-Bar
Figure 4.100: Attaching Tow-Bar
103
Revision A