Installing Drive Cover
Install reel drive cover as follows:
1. For SINGLE REEL DRIVE, position reel drive cover (A)
to the reel drive and secure with four bolts (B).
2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
6.9.2 Replacing Double Reel U-Joint
The reel drive U-joint allows movement between the two reels. This allows either reel to move independently.
Lubricate the U-joint in accordance with the requirements. Refer to
U-joint should be replaced if severely worn or damaged. Refer to
169899
MAINTENANCE AND SERVICING
Figure 6.214: Single Reel Drive Cover
Figure 6.215: Double Reel Drive Cover
224
6.3.6 Lubrication and Servicing, page
Removing Double Reel U-Joint, page
132.
225.
Revision A