MacDon D65 Operator's Manual page 82

3. At divider storage location, lift divider to disengage
lugs (A) at lower end and then lower it slightly to
disengage pin (B) from endsheet.
4. Position crop divider as shown by locating lugs (A) in
holes in endsheet.
5. Lift forward end of divider until pin (B) at top of divider
engages and closes latch (C).
6. Push safety lever (D) down to lock pin in latch.
169899
OPERATION
Figure 4.51: Stored Crop Divider
Figure 4.52: Crop Divider
A - Lugs
C - Latch
70
B - Pin
D - Safety Lever
Revision A