MacDon D65 Operator's Manual page 33

10. MD #184372
a. General hazard pertaining to machine operation
and servicing
b. CAUTION
To avoid injury or death from improper or unsafe
machine operation:
• Read the operator's manual and follow all safety
instructions. If you do not have a manual, obtain
one from your Dealer.
• Do not allow untrained persons to operate
the machine.
• Review safety
Operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of machine
before starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of
moving parts.
• Disengage header drive, put transmission in
Neutral, and wait for all movement to stop
before leaving operator's position.
• Shut off the engine and remove the key from
ignition before servicing, adjusting, lubricating,
cleaning, or unplugging machine.
• Engage safety props to prevent lowering
of raised unit
raised position.
• Use slow moving vehicle emblem and flashing
warning lights when operating on roadways
unless prohibited by law.
11. MD #184422
a. Keep shields in place hazard
b. WARNING
• To avoid injury, stop the engine and remove the
key before opening power drive system shield
• Keep all shields in place
169899
SAFETY
instructions with
before servicing in
all
Figure 1.35: MD #184372
the
Figure 1.36: MD #184422
21
Revision A