Stub Guard Conversion Kit; Vertical Knife Mounts - MacDon D65 Operator's Manual

8.2.3 Stub Guard Conversion Kit

Stub guards, complete with top guides and adjuster shoes,
are designed to cut tough crops.
Installation and adjustment instructions are included in
the kit.
Order bundle according to the length of your header:
• 15 ft. – MD #B5009
• 20 ft. – MD #B5010
• 25 ft. – MD #B5011
• 30 ft. – MD #B5012
• 35 ft. – MD #B5013

8.2.4 Vertical Knife Mounts

The vertical knife 21 mounts allow installation of vertically
oriented knives onto both ends of the header.
Installation and adjustment instructions are included with
the bundle.
Order bundles based on left or right side:
• LH – MD #B5757
• RH – MD #B5758
NOTE:
If mounting on multiple headers, you will also require the
auxiliary vertical knife plumbing kit MD #B5406.
21. Must be purchased from a separate supplier.
169899
OPTIONS AND ATTACHMENTS
Figure 8.6: Stub Guards
Figure 8.7: Vertical Knife Mount
262
Revision A