4. At the right end of the 25, 35, and 40 ft. header:
a. Place the inner end of the inner half of the tow-bar
in cradle (A) on header backtube.
b. Secure tube end in support (B) with clevis pin (C).
Secure with hairpin.
c. Install rubber strap (D) on cradle (A).
5. At the right end of the 30 ft. header:
a. Place the inner end of the inner half of the tow-bar
in cradle (A) on header backtube.
b. Secure tube end in support (B) with pin (C).
c. Install rubber strap on cradle (A).
169899
OPERATION
Figure 4.75: 25, 35, and 40 ft. Header
Figure 4.76: 30 ft. Header
92
Revision A