Shifting Decks Manually - MacDon D65 Operator's Manual

4.9.2 Shifting Decks Manually

Both decks can be moved manually to deliver the crop from the center or right/left end on 25 to 40 ft. headers.
To deliver crop from the right end, move the decks to the
left end of the header:
CAUTION
Stop engine and remove key from ignition before
leaving operator's seat for any reason. A child or
even a pet could engage an idling machine.
1. Loosen bolt (A) on the right deck.
2. Slide deck to close off the center opening. Retighten
bolt (A).
3. Reverse the draper drive motor hoses (A) on the
moved deck so that the draper turns the same direction
as the existing deck.
NOTE:
Loosen clamp on plastic sleeve at drive motor so that
hoses (A) can be reversed. Retighten clamp.
To deliver crop from the left end, move the decks to the right
end of the header as per the above steps.
169899
OPERATION
Figure 4.62: Right Deck Shown
Figure 4.63: Right Deck Motor
77
Revision A