Adjusting Reel Drive Chain Tension; Removing Drive Cover - MacDon D65 Operator's Manual

2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).

6.9.6 Adjusting Reel Drive Chain Tension

Removing Drive Cover

1. Remove the reel drive cover (A) as follows:
a. For SINGLE REEL DRIVE, remove the four
bolts (B) that secure the cover (A) to the reel drive.
b. For DOUBLE REEL DRIVE, remove the six
bolts (B) that secure the upper cover (A) to the
reel drive and to the lower cover (C).
NOTE:
The lower cover (C) may also be removed by
taking off the three bolts (D).
169899
MAINTENANCE AND SERVICING
Figure 6.255: Double Reel Drive Cover
Figure 6.256: Single Reel
Figure 6.257: Double Reel
240
Revision A