Installing Drive Cover
Install reel drive cover as follows:
1. For SINGLE REEL DRIVE, position reel drive cover (A)
to the reel drive and secure with four bolts (B).
2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
6.9.4 Replacing Drive Chain on Double Reel
The drive chain on a high torque double reel drive can be replaced using two methods. Refer to:
•
Disconnecting the Reel Drive Method, page 234
•
Breaking the Chain Method, page 236
Both procedures are acceptable, but disconnecting the reel drive method is preferred because the chain integrity is
not affected.
169899
MAINTENANCE AND SERVICING
Figure 6.236: Single Reel Drive Cover
Figure 6.237: Double Reel Drive Cover
233
Revision A