MacDon D65 Operator's Manual page 120

5. Push hose connectors onto mating receptacle until
collar on receptacle snaps into lock position.
6. Remove cover on electrical receptacle (A).
7. Push electrical connector onto receptacle and turn
collar on connector to lock it in.
8. Attach cover to mating cover on tractor wiring.
9. Lower lever (A) and engage in down position.
10. Before connecting reel hydraulics, check connectors
and clean if required.
169899
HEADER ATTACHMENT/DETACHMENT
108
Figure 5.3: Header Receptacles
A - Electrical Connector
C - Case Drain (Double Knife)
E - Return
Figure 5.4: Hose Storage
Figure 5.5: Reel Hose Storage
B - Knife Drive
D - Draper Drive
Revision A