MacDon D65 Operator's Manual page 194

7. Insert a pry bar (A) in hole in deck located at
approximately the deck mid-point, and lift deck clear
of cutterbar.
NOTE:
Pry bar should be of sufficient length to
accommodate width of draper.
8. Support pry bar (A) on a stand (B) of suitable height.
9. Pull draper off deck onto pry bar.
10. Remove stand (B), draper, and pry bar (A).
169899
MAINTENANCE AND SERVICING
Figure 6.113: Lifting the Deck
Figure 6.114: Removing Draper
182
Revision A