Moving Rear (Right) Wheels Into Transport Position - MacDon D65 Operator's Manual
Draper header for self-propelled windrowers
Hide thumbs
Also See for D65:
- Operator's manual (310 pages) ,
- Assembly instruction manual (110 pages) ,
- Installation instructions manual (74 pages)
Table of Contents
Advertisement
7. Remove pin (A) from storage at top of leg (B).
8. Move and swivel wheels clockwise so that connector
(C) is turned towards the front end of the header.
9. Insert pin (A) and turn to lock.
10. Lower header so that left wheels are just touching the
ground.
Moving Rear (Right) Wheels into Transport Position
To move the right (rear) transport wheels into transport
position, follow these steps:
169899
OPERATION
Figure 4.88: Swivelling Wheels
98
Revision A
Advertisement
Table of Contents
