MacDon D65 Operator's Manual page 123
Draper header for self-propelled windrowers
Hide thumbs
Also See for D65:
- Operator's manual (310 pages) ,
- Assembly instruction manual (110 pages) ,
- Installation instructions manual (74 pages)
Table of Contents
Advertisement
7. To disconnect hoses from header, line up slot (A) in
collar with pin (B) on connector.
8. Push collar toward pin and pull connector to disengage.
9. Install caps on connectors and hose ends (if equipped).
10. Route hose bundle (A) back onto hose support
on windrower.
11. Rotate lever (B) and lock in down position.
12. Install cap (C) on electrical connector.
13. Detach header from windrower. Refer to the windrower
operator's manual.
169899
HEADER ATTACHMENT/DETACHMENT
111
Figure 5.11: Quick Disconnect
Figure 5.12: Hose Storage
Revision A
Advertisement
Table of Contents
