MacDon D65 Operator's Manual page 111

1. Remove hairpin (A) from latch (B).
2. Lift latch (B), disengage right axle (C), and lower to
ground.
CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
3. Carefully pull handle (D) to release the spring and let
the wheel drop to the ground.
4. Lift wheel and linkage with handle (E) and position
linkage in second slot from bottom.
5. Lower handle (C) to lock.
6. Remove pin (A) and install at (B) to secure linkage.
Turn pin (A) to lock.
7. Pull pin (D), swivel wheel (C) counterclockwise 90
degrees, and re-lock with pin (D).
169899
OPERATION
Figure 4.89: Separating Axles
Figure 4.90: Positioning Wheel
99
Revision A