Tightening Drive Chain; Installing Drive Cover - MacDon D65 Operator's Manual

Tightening Drive Chain

1. Ensure the six bolts (B) securing motor mount to chain
case are loose.
2. Slide motor and motor mount upwards until chain (A)
is tight, and tighten bolts (nuts on backside).
3. There should be 1/8 in. (3 mm) of slack in the chain.
Adjust if necessary.
4. Torque bolts (B) to 54 lbf·ft (73 N·m).

Installing Drive Cover

1. Position the lower cover (C) first (if removed) and
secure with three bolts (D).
2. Install upper cover (A) using the six bolts (B).
169899
MAINTENANCE AND SERVICING
Figure 6.247: Reel Drive
Figure 6.248: Double Reel Drive Cover
237
Revision A