MacDon D65 Operator's Manual page 148

Figure 6.24: Every 250 Hours (Continued)
A - Rear Axle Pivots
C -Frame/Wheel Pivot (1 PLC) - Both Sides
19. U-joint has an extended lubrication cross and bearing kit. Stop greasing when greasing becomes difficult or if U-joint stops
taking grease. Overgreasing will damage U-joint. six to eight pumps are sufficient at first grease (factory). Decrease grease
interval as U-joint wears and requires more than six pumps.
169899
MAINTENANCE AND SERVICING
B - Front Wheel Pivot (1 PLC)
D - Double Reel U-Joint (1 PLC) 19
136
Revision A