Levelling The Header - MacDon D65 Operator's Manual

OPERATION

4.12 Levelling the Header

The windrower linkages are factory-set to provide the proper level for the header and should not normally
require adjustment.
NOTE:
The float springs are NOT used to level the header.
If the header is not level, check the pressure of the windrower's tires to ensure they are properly inflated (refer to
your windrower's operator's manual).
If the header is still not level, adjust the windrower linkages as required (refer to the appropriate section in the
windrower's operator's manual).
83
169899 Revision A