Detaching Header From Windrower - MacDon D65 Operator's Manual

5.2 Detaching Header from Windrower

To detach the header from the windrower,
these steps:
1. Fully lower the reel.
2. To disconnect the reel hydraulics, push in lock
button (A) and pull handle (B) to disengage
multi-coupler (C) from header receptacle.
3. Route hose bundle back onto windrower and store
multi-coupler (C) on hose support.
4. Close cover on header receptacle (A).
5. To disconnect header drive hydraulics, disengage and
rotate lever (A) counterclockwise to fully up position.
6. Disconnect electrical connector from header.
169899
HEADER ATTACHMENT/DETACHMENT
follow
110
Figure 5.8: Reel Hydraulics
Figure 5.9: Close Cover
Figure 5.10: Header Drive Hydraulics
Revision A