Installing Reel Drive Motor - MacDon D65 Operator's Manual

Installing Reel Drive Motor

To install the reel drive hydraulic motor, follow these steps:
1. Slide motor mount (A) up or down so that mounting
holes are accessible through openings in chain case.
2. Attach motor (B) and spacer (C) to motor mount with
four 1/2 in.x 1.75 countersunk bolts (D).
3. Secure motor with lock nuts (E).
4. Torque nuts to 54 lbf·ft (73 N·m).
5. If installing new motor, install fittings (F) from old motor
onto new motor.
6. Reattach hydraulic lines (A) to motor (B).
169899
MAINTENANCE AND SERVICING
Figure 6.231: Reel Drive Motor
A - Motor Mount
D - Bolts
Figure 6.232: Reel Drive
231
B - Hydraulic Motor C - Spacer
E - Lock Nuts F - Hydraulic Fittings
Revision A