Endshields; Opening Endshields - MacDon D65 Operator's Manual

3. Use handle (B) to move lock rod (A) to outboard
position.

4.2.3 Endshields

A hinged, polyethylene endshield is fitted on each end of the header.

Opening Endshields

To open an endshield, follow these steps.
1. Remove lynch pin (A) and tool (B) from pin (C) at top
rear of endshield.
169899
OPERATION
Figure 4.6: Center Arm Safety Prop
Figure 4.7: Endshield
37
Revision A