MacDon D65 Operator's Manual page 121

11. Open cover on header receptacle (A).
12. Push in lock button (B) and pull handle (C) to half
open position.
13. Remove hose bundle with multi-coupler (C) from
windrower, locate onto header receptacle and push
handle (B) to engage pins on connector.
14. Push handle away from hoses until lock button (A)
snaps out.
15. Raise and lower header and reel a few times to allow
trapped air to pass back to the reservoir.
169899
HEADER ATTACHMENT/DETACHMENT
109
Figure 5.6: Reel Hydraulics Receptacle
Figure 5.7: Reel Hose Connection
Revision A