MacDon D65 Operator's Manual page 147

Figure 6.23: Every 250 Hours
A - Upper Cross Auger U-joint 17
17. U-joint has an extended lubrication cross and bearing kit. Stop greasing when greasing becomes difficult or if U-joint stops
taking grease. Overgreasing will damage U-joint. six to eight pumps are sufficient at first grease (factory). Decrease grease
interval as U-joint wears and requires more than six pumps.
18. Use High Temperature Extreme Pressure (EP2) Performance With 1.5–5.0% Molybdenum Disulphide (NLGI Grade 2)
Lithium Base Grease
169899
MAINTENANCE AND SERVICING
B - Upper Cross Auger Bearing (2 PLCS) 18
135
Revision A