Loosening Drive Chain; Removing Drive Sprocket - MacDon D65 Operator's Manual

Loosening Drive Chain

1. Loosen nuts (A). Slide motor (B) and motor mount (C)
down towards reel shaft.

Removing Drive Sprocket

1. Remove the drive chain (A) from the drive sprocket (B).
2. Remove the cotter pin (A), slotted nut (B), and flat
washer (C) from the motor shaft.
3. Remove the drive sprocket (D). Ensure key remains in
the shaft.
IMPORTANT:
Do NOT use pry bar and/or hammer to remove drive
sprocket (D). This will damage the motor. Use a puller if
drive sprocket does not come off by hand.
169899
MAINTENANCE AND SERVICING
Figure 6.208: Reel Drive
Figure 6.209: Reel Drive
Figure 6.210: Reel Drive
222
Revision A