Use Of Do Terminals; Use Of Ai Terminals - IACDRIVE I5300 Series User Manual

I5300 User Manual

4.11 Use of DO Terminals

The control board provides three DO terminals, namely FM, DO1 and TA/TB/TC. FM and
DO1 are transistor outputs and can drive 24 VDC low-voltage circuit; TA/TB/TC is relay
output, and can drive 250 VAC control circuit.
You can obtain another two terminals DO2 and PA/PB/PC by installing an I/O extension
card. DO2 is transistor output and PA/PB/PC is relay output.
You can defne the function of the DO terminals by setting P5-01 and P5-05 to indicate the
running state and alarm information of the AC drive. There are a total of 40 functions. For
details, see the descriptions of group P5.
Terminal Corresponding Function Code
P5-06 when P5-00 = 0
FM-CME
P5-01 when P5-00 = 1
TA-TB-TC P5-02
PA-PB-PC P5-03
DO1-CME P5-04
DO2-CME P5-05
When P5-00 = 0, the FM terminal is high-speed pulse output. The frequency of output
pulses indicates the value of the internal running parameters. The greater the value is, the
higher the output pulse frequency is. The 100% value corresponds to 100 kHz. The property
of the indicated internal parameter is defned by P5-06.

4.12 Use of AI Terminals

The AC drive supports a total of three AI terminals, among which AI1 and AI2 are provided
on the control board and AI3 is provided on the extension card.
Terminal
AI1-GND It receives the signal of 0–10 VDC.
AI2-GND If J8 is connected to the position with "V" mark, it receives the signal of 0–10 VDC.
If J8 is connected to the position with "I" mark, it receives the signal of 4–20 mA.
AI3-GND It is provided on the extension card and receives the signal of -10 to +10 VDC.
As external voltage/current signal, AI is used for frequency source setting, torque setting,
voltage setting at V/F separation, and PID setting or feedback. The corresponding relationship
of the voltage or current and actual setting or feedback is defined by P4-13 to P4-27.
Operation, Display and Application Example
Output Feature Description
Transistor, able to output high-speed pulses 10 Hz
to 100 kHz; drive capacity: 24 VDC, 50 mA
Transistor; drive capacity: 24 VDC, 50 mA
Relay; drive capacity: 250 VAC, 3 A
Extension card, relay; drive capacity: 250 VAC, 3 A
Transistor; drive capacity: 24 VDC, 50 mA
Extension card, transistor; drive capacity: 24 VDC,
50 mA
Input Signal Characteristic
- 73 -