IACDRIVE I5300 Series User Manual page 185

I5300 User Manual
Function Parameter
Code Name
LED display
P7-04 running
parameters 2
These two parameters are used to set the parameters that can be viewed when the AC
drive is in the running state. You can view a maximum of 32 running state parameters that
are displayed from the lowest bit of P7-03.
0000–FFFF
7 6 5 4 3 2
15 14 13 12 11 10 9 8
If a parameter needs to be displayed during the running,
set the corresponding bit to 1, and set P7-03 to the
hexadecimal equivalent of this binary number.
Description of Function Codes
Setting Range
1 0
PID feedback
PLC stage
Pulse setting frequency (kHz)
Running frequency 2
Remaining running time
AI1 voltage before correction
AI2 voltage before correction
AI3 voltage before correction
Linear speed
Current power-on time (Hour)
Current running time (Minute)
Pulse setting frequency (Hz)
Communication setting value
Encoder feedback speed (Hz)
Main frequency X display (Hz)
Auxiliary frequency Y display (Hz)
- 185 -
Default
0