IACDRIVE I5300 Series User Manual page 22

Product Information
Item
Multi-motor
switchover
Multiple
communication
protocols
Motor overheat
protection
Individualized
functions
Multiple encoder
types
User
programmable
function
Advanced
background
software
Running
command source
Frequency source
Auxiliary
RUN
frequency source
Input terminal
Specifications
Four motors can be switched over via four groups of motor
parameters.
It supports communication via Modbus-RTU, PROFIBUS-
DP, CANlink and CANopen.
The optional I/O extension card enables AI3 to receive the
motor temperature sensor input (PT100, PT1000) so as to
realize motor overheat protection.
It supports various encoders such as differential encoder,
open-collector encoder, resolver, UVW encoder, and SIN/
COS encoder.
The optional programming card helps you to realize
secondary development. Its programming environment is
compatible with that of the PLC of Inovance.
It supports the operation of AC drive parameters and virtual
oscillograph function, via which the state inside the AC drive
is monitored.
• Operation panel
• Control terminals
• Serial communication port
You can perform switchover between these sources in
various ways.
There are a total of 10 frequency sources, such as digital
setting, analog voltage setting, analog current setting, pulse
setting and serial communication port setting.
You can perform switchover between these sources in
various ways.
There are ten auxiliary frequency sources. It can implement
fine tuning of auxiliary frequency and frequency synthesis.
Standard:
5 digital input (DI) terminals, one of which supports up to
100 kHz high-speed pulse input
2 analog input (AI) terminals, one of which only supports
0–10 V voltage input and the other supports 0–10 V voltage
input or 4–20 mA current input
Expanding capacity:
5 DI terminals
1 AI terminal that supports -10–10 V voltage input and also
supports PT100\PT1000
- 22 -
I5300 User Manual