IACDRIVE I5300 Series User Manual page 142

Description of Function Codes
Function Code Parameter Name
P0-08 Preset frequency
If the frequency source is digital setting or terminal UP/DOWN, the value of this parameter
is the initial frequency of the AC drive (digital setting).
Function Code Parameter Name
P0-09 Rotation direction
You can change the rotation direction of the motor just by modifying this parameter without
changing the motor wiring. Modifying this parameter is equivalent to exchanging any two of
the motor's U, V, W wires.
The motor will resume running in the original direction after parameter initialization. Do not use
this function in applications where changing the rotating direction of the motor is prohibited after
system commissioning is complete.
Function Code
P0-10 Maximum frequency
When the frequency source is AI, pulse setting (DI5), or multi-reference, 100% of the input
corresponds to the value of this parameter.
The output frequency of the I5300 can reach up to 3200 Hz. To take both frequency
reference resolution and frequency input range into consideration, you can set the number
of decimal places for frequency reference in P0-22.
• If P0-22 is set to 1, the frequency reference resolution is 0.1 Hz. In this case, the
setting range of P0-10 is 50.0 to 3200.0 Hz.
• If P0-22 is set to 2, the frequency reference resolution is 0.01 Hz. In this case, the
setting range of P0-10 is 50.00 to 320.00 Hz.
After the value of P0-22 is modified, the frequency resolution of all frequency related function
codes change accordingly.
0.00 to maximum frequency (valid when
frequency source is digital setting)
0: Same direction
1: Reverse direction
Parameter Name
Setting Range
Setting Range
Note
Setting Range
50.00–320.00 Hz
Note
- 142 -
I5300 User Manual
Default
0
Default
50.00 Hz
Default
50 Hz