Table of Contents
Advertisement
Mechanical and Electrical Installation
Figure 3-10 Embedded installation of the I5300 (sheet metal housing)
Figure 3-11 Embedded installation effect of the I5300 (sheet metal housing)
Installation Precautions
■
1)
Reserve the installation clearances as specified in Figure 3-1 to ensure sufficient
space for heat dissipation. Take heat dissipation of other parts in the cabinet into
consideration.
2)
Install the AC drives upright to facilitate heat dissipation. If multiple AC drives are
installed in the cabinet, install them side by side. If one row of AC drives need to be
installed above another row, install an insulation guide plate, as shown in Figure 3-2.
3)
Use incombustible hanging bracket.
4)
In scenarios with heavy metal powder, install the heatsink outside the cabinet, and
ensure that the room inside the fully-sealed cabinet is as large as possible.
Install the AC drive from the
back of the control cabinet .
- 34 -
I5300 User Manual
Back panel of
control cabinet
Advertisement
Table of Contents
