IACDRIVE I5300 Series User Manual page 23

I5300 User Manual
Item
RUN Output terminal
LED display
Key locking and
function selection
Display and
Protection mode
operation on
the operation
panel
Optional parts
Installation
location
Altitude
Ambient
temperature
Humidity
Environment Vibration
Storage
temperature
IP level
Pollution degree
Power distribution
system
Specifications
Standard
1 high-speed pulse output terminal (open-collector) that
supports 0–100 kHz square wave signal output
1 digital output (DO) terminal
1 relay output terminal
1 analog output (AO) terminal that supports 0–20 mA
current output or 0–10 V voltage output
Expanding capacity:
1 DO terminal
1 relay output terminal
1 AO terminal that supports 0–20 mA current output or 0–10
V voltage output
It displays the parameters.
It can lock the keys partially or completely and define the
function range of some keys so as to prevent mis-function.
Motor short-circuit detection at power-on, input/output
phase loss protection, overcurrent protection, overvoltage
protection, undervoltage protection, overheat protection and
overload protection
LCD operation panel, braking unit, I/O extension card 1,
I/O extension card 2, user programmable card, RS485
communication card, PROFIBUS-DP communication card,
CANlink communication card, CANopen communication
card, differential input PG card, UVW differential input PG
card, resolver PG card and OC input PG card
Indoor, free from direct sunlight, dust, corrosive gas,
combustible gas, oil smoke, vapour, drip or salt.
Lower than 1000 m
-10°C to +40°C (de-rated if the ambient temperature is
between 40°C and 50°C)
Less than 95%RH, without condensing
Less than 5.9 m/s2 (0.6 g)
-20°C to +60°C
IP20
PD2
TN , TT
- 23 -
Product Information