IACDRIVE I5300 Series User Manual page 203

I5300 User Manual
Function Code Parameter Name
Fault protection
P9-47
action selection 1
Fault protection
P9-48
action selection 2
Setting Range
Unit's digit (Motor overload, Err11)
0: Coast to stop
1: Stop according to the stop mode
2: Continue to run
Ten's digit (Power input phase loss, Err12)
Same as unit's digit
Hundred's digit (Power output phase loss, Err13)
Same as unit's digit
Thousand's digit (External equipment fault, Err15)
Same as unit's digit
Ten thousand's digit (Communication fault, Err16)
Same as unit's digit
Unit's digit (Encoder fault, Err20)
0: Coast to stop
1: Switch over to V/F control, stop according to the
stop mode
2: Switch over to V/F control, continue to run
Ten's digit (EEPROM read-write fault, Err21)
0: Coast to stop
1: Stop according to the stop mode
Hundred's digit: reserved
Thousand's digit (Motor overheat, Err25)
Same as unit's digit in P9-47
Ten thousand's digit (Accumulative running time
reached)
Same as unit's digit in P9-47
- 203 -
Description of Function Codes
Default
00000
00000