IACDRIVE I5300 Series User Manual page 186

Description of Function Codes
Function Parameter
Code Name
LED
P7-05 display stop
parameters
Function Code
P7-06
This parameter is used to adjust the relationship between the output frequency of the AC
drive and the load speed. For details, see the description of P7-12.
Function Code
P7-07
It is used to display the insulated gate bipolar transistor (IGBT) temperature of the inverter
module, and the IGBT overheat protection value of the inverter module depends on the
model.
Function Code
P7-08
IIt is used to display the temporary software version of the control board.
0000–FFFF
7 6 5 4 3 2
15 14 13
If a parameter needs to be displayed during the running,
set the corresponding bit to 1, and set P7-05 to the
hexadecimal equivalent of this binary number.
Parameter Name
Load speed display coefficient
Parameter Name
Heatsink temperature of inverter module
Parameter Name
Temporary software version
Setting Range
1 0
12 11 10 9 8
Setting Range
0.0001–6.5000
- 186 -
I5300 User Manual
Set frequency (Hz)
Bus voltage (V)
DI input status
DO output status
AI1 voltage (V)
AI2 voltage (V)
AI3 voltage (V)
Count value
Length value
PLC stage
Load speed
PID setting
Pulse setting
frequency (kHz)
Reserved
Reserved
Reserved
Default
1.0000
Setting Range Default
0.0–100.0°C
Setting Range Default
0.0–100.0°C
Default
0
-
-