Definition And Operation Of The Multifunction Key (Mf.k); Viewing Status Parameters - IACDRIVE I5300 Series User Manual

Operation, Display and Application Examples

4.5 Definition and Operation of the Multifunction Key (MF.K)

You can define the function (command source switchover or rotation direction switchover) of
the multifunction key in P7-01. For details, see the description of P7-01.

4.6 Viewing Status Parameters

In the stop or running state, you can press
parameters. Whether parameters are displayed is determined by the binary bits of values
converted from the values of P7-03,P7-04, and P7-05 in the hexadecimal format.
In stop state, a total of 13 status parameters can be displayed, as listed in the following
table.
Function Parameter
Code Name
LED display
P7-05
stop parameters
0000–FFFF
7 6 5 4 3 2
15 14 13 12 11 10 9 8
- 52 -
on the operation panel to display status
Setting Range
1 0
Set frequency (Hz)
Bus voltage (V)
DI input status
DO output status
AI1 voltage (V)
AI2 voltage (V)
AI3 voltage (V)
Count value
Length value
PLC stage
Load speed
PID setting
Pulse setting
frequency (kHz)
Reserved
Reserved
Reserved
I5300 User Manual
Default
33