IACDRIVE I5300 Series User Manual page 221

I5300 User Manual
Function Code Parameter Name
AC drive
PP-02 parameter display
property
Individualized
PP-03 parameter display
property
The setting of parameter display mode aims to facilitate you to view different types of
parameters based on actual requirements. The I5300 provides the following three
parameter display modes.
Table 6-9 Three parameter display modes provided by I5300
Name
AC drive parameter display
User-defined parameter display
User-modified parameter display
If one digit of PP-03 is set to 1, you can switch over to different parameter display modes by
pressing key
QUICK
The display codes of different parameter types are shown in the following table.
Table 6-10 Display codes of different parameter types
Unit's digit (Group U display selection)
0: Not display
1: Display
Ten's digit (Group A display selection)
0: Not display
1: Display
Unit's digit (User-defined parameter
display selection)
0: Not display
1: Display
Ten's digit (User-modified parameter
display selection)
0: Not display
1: Display
Display function codes of the AC drive in sequence of P0
to PF, A0 to AF and U0 to UF.
Display a maximum of 32 user-defined parameters
included in group PE.
Display the parameters that are modified.
. By default, the AC drive parameter display mode is used.
Parameter Type
AC drive parameter
User-defined parameter
User-modified parameter
Description of Function Codes
Setting Range
Description
Display Code
- 221 -
Default
11
00