IACDRIVE I5300 Series User Manual page 141

I5300 User Manual
Function Code Parameter Name
Frequency source
P0-07
selection
It is used to select the frequency setting channel. If the frequency source involves X and
Y operation, you can set the frequency offset in P0-21 for superposition to the X and Y
operation result, flexibly satisfying various requirements.
Figure 6-1 Frequency setting based on main frequency source X and auxiliary frequency
source Y
Frequency
source selection
Main
frequency
source X
Auxiliary
frequency
source Y
Unit's digit (Frequency source selection)
0: Main frequency source X
1: X and Y operation
(operation relationship determined by ten's
digit)
2: Switchover between X and Y
3: Switchover between X and "X and Y
operation"
4: Switchover between Y and "X and Y
operation"
Ten's digit (X and Y operation relationship)
0: X+Y
1: X-Y
2: Maximum
3: Minimum
Frequency source X and
Y operation selection
P0-07 ten's
digit
Amplitude
limit
Description of Function Codes
Setting Range
Setting of operation
conditions
P0-07 unit's
digit
Frequency
switchover
P4-00 to P4-09
= 18
DI1 to DI10
- 141 -
Default
0
Target running
frequency
Set frequency