Homing The Fixture (Home); Turning The Lamp On Or Off (Lamp) - High End Systems Studio Spot 250 User Manual

Homing the Fixture (HOME)

This menu item allows you to manually home the fixture. If you want to remotely
home the fixture (using a DMX controller), see "Control" on page 3-14.
Caution: You should home the fixture immediately if you notice that the
litho wheel has lost position (i.e. stuck between two litho
patterns). If the litho wheel is not correctly aligned in the
optical path, the wheel could be damaged.
To manually home the fixture:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "HOME"
option. (This will be the first option displayed.)
4. Press the <Enter> button to select the "HOME" option. The LED will
alternately display "RST" and "HOME" while the fixture homes.

Turning the Lamp On or Off (LAMP)

To manually turn the lamp on or off:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "LAMP" menu
and press the <Enter> button to select the "LAMP" menu.
4. Using the <Up> and <Down> arrow buttons, choose the "ON" option to
strike the lamp, or the "OFF" option to extinguish the lamp. Press the
or
<Enter> button to select the desired option.
4-30 Understanding the Menu System
®
Studio Spot 250 / Studio Color
®
250 User Manual