Upload And Crossload Troubleshooting - High End Systems Studio Spot 250 User Manual

Table of Contents

Advertisement

Problem
Dichroic or litho is not
centered in the beam or
is in the wrong position.
Dichroics or lithos in
Studio Spot 250 are
cracking
Light output is low and/
or fuzzy.
Upload and Crossload
Troubleshooting
To find solutions to problems encountered while uploading or crossloading new
software versions, see Table 8-4.
Problem
Not all fixtures on the link
are receiving the upload.
®
Studio Spot
250 / Studio Color
Table 8-3. General Troubleshooting
Probable Cause
• The wheel has lost
position.
• The dichroic or litho
does not meet High End
Systems specifications.
• The dichroic or litho was
improperly installed.
• The dichroic or litho
does not meet High End
Specifications.
• A faulty hot mirror
allowing overheating
inside the fixture.
The optical path is dirty.
Table 8-4. Upload and Crossload Troubleshooting
Probable Cause
• Fixture(s) are OFF
• Bad cable(s)
• Cable(s) disconnected
®
250 User Manual
Solution
• Home the fixture (see "Control" on page
3-14 or "Homing the Fixture (HOME)" on
page 4-30). You should home the fixture
immediately if you notice that the litho
wheel has lost position (i.e. stuck
between two patterns). If the litho wheel
is not correctly aligned in the optical
path, the wheel could be damaged.
• Replace the dichroic or litho with one that
meets the specifications listed in the
section titled "Dichroic, Litho, and Effect
Specifications" on page intro-7.
• Verify the dichroic or litho is correctly
installed (see "Replacing Studio Spot®
250 Wheel Components" on page 7-7).
• Replace the dichroic or litho with one that
meets the specifications listed in the
section titled "Dichroic, Litho, and Effect
Specifications" on page intro-7.
• Contact High End Systems customer
service (see "Contacting High End
Systems" on page ii).
Clean the internal glass components (see
"Cleaning the Glass Components" on page
7-20).
Solution
• Turn Fixture(s) on
• Test and replace cable(s)
as necessary
• Reconnect cable(s)
Troubleshooting
8
8-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio color 250

Table of Contents