Accessing The Menu System; Menu Maps - High End Systems Studio Spot 250 User Manual

Pressing the <Menu> button returns you to the previous option or menu without
changing the value of an option.

Accessing the Menu System

To access the menu system, press and hold the <Menu> key until "ADDR" appears
on the LED display. The menu system is protected against inadvertent menu changes
by requiring the <Menu> button to be held for a few seconds before allowing entry
to the menus.
To exit the menu system, you must keep pressing the <Menu> button to back out of
each menu level until "MENU" appears on the LED display. "MENU" will be
replaced, after a few seconds, with the default alternating display of the fixture's
software version and the fixture number/DMX start channel.
Note: The words "AUTO" and "LOCK" will appear briefly on the display after
"MENU." As mentioned above, the fixture's software is "locking" the
display after you have accessed the menu system.

Menu Maps

Studio Spot
A complete map of the menu system for Studio Spot 250 is shown in Table 4-1. See
individual subsections for descriptions of each menu item.
Menu Menu
Level 1 Level 2
ADDR Fxx/Cxxx
FACT
SWAP
SET
T/IN
P/IN
DSPL
4-2 Understanding the Menu System
®
250 Menu Map
Table 4-1. Studio Spot
Menu Menu
Level 3 Level 4
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
®
250 Menu Map
Menu
Level 5
change the existing fixture number/DMX start
channel
set factory defaults on
set factory defaults off
set pan/tilt swap on
set pan/tilt swap off
set tilt invert on
set tilt invert off
set pan invert on
set pan invert off
set LED display on
Studio Spot
Description
® ®
250 / Studio Color 250 User Manual