Fixture Options; Address Menu (Addr); Set Menu (Set) - High End Systems Studio Spot 250 User Manual

Fixture Options

The sections below explain how to access the fixture options shown in the fixture's
menu map. All menu items are explained except preset programming (PRST), which
is discussed in "Chapter 5 Preset Programming" on page 5-1.

Address Menu (ADDR)

Use the Address menu to quickly change the current fixture number/DMX start
channel. Using this menu option, you can only change the existing fixture number to
another fixture number, or the existing DMX start channel to another DMX start
channel.
If you want to change the way you identify the fixture (i.e. change to a fixture number
instead of a DMX start channel, or vice versa), complete the procedure described in
"Changing the Control Method (CHNL)" on page 4-24.
To change the current fixture number or DMX start channel:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Press the <Enter> button to select the "ADDR" menu.
3. Use the <Up> and <Down> arrow buttons to select a new DMX start
channel (C001 - C512) / fixture number (F 01 - F xx). The LED display will
or
flash when a new option is selected.
4. Press the <Enter> button to accept the new fixture number / DMX start
channel. The LED display will stop flashing when a new option is entered.
If you do not press the <Enter> button, the new option you selected will
not be stored.
Note: Be sure you do not overlap fixture channel ranges when changing the
fixture number/DMX start channel (see "Channel Range" on page 2-3).

Set Menu (SET)

The Set menu allows you to change the fixture number to a DMX start channel or vice
versa, and either set all factory options to their default settings or change the factory
options individually. The procedures below are listed in the order they appear on the
menu map (see Table 4-1 or Table 4-2).
Understanding the Menu System
4-20
®
Studio Spot 250 / Studio Color
®
250 User Manual